Dual IDF Style Kit with CB Manifolds & Linkage - 48mm for Type 1

This set is made up from a very nice IDF copy and rounded out with CB Performance manifolds, air cleaners and linkage. It comes in 3 sizes so they will work on anything from a stock 1600 to your next monster stroker motor.
Manufacturer part number: IDF T1 48CBK

These kits contain a very nice quality pair of IDF copy carburetors matched with CB Performance intake manifolds, aluminum air cleaners and hex bar linkage. We have had very good luck with these kits over the past few years.  We were very hesitant to use them at first, but they have proven to be a good quality copy with excalent hardware.  In fact, we are using these more than the Redline kits simply because the CB Performance manifolds, linkange and air cleaners are far superior to the Redline kits.

Vintage Volks will disassemble each carburetor, clean out the bowls and set the floats before shipping the set to you.  That way you know it is right before you pull it out of the box.  They come with everything you need to convert from the stock carburetor to dual 2 barrel carbs for better power and fuel efficiency. 

  A pair of IDF style carburetors
  CB Performance air cleaner tops and bottoms
  Chrome velocity stacks (except 40mm kits)
  CB Performnace thick manifolds so you can port them to match your heads
  CB Performance hex bar linkage with steel down rods
  All the required hardware

  Aircooled VW Type 1

Available Sizes: