Featured products
3 Angle Valve Job - Per Head
Cylinder heads are where the power is made. A 3 angle valve job will help your heads flow much more air and create much more power.
$125.00
Cut for Dual Springs - Per Head
With higher lift cams and larger valves, you need more seat pressure. That means dual springs!
$85.00
Hoover Mods
The Type 1 based air cooled VW engine has a flawed oil system design that does not allow enough oil to the 1-2 side of the case. The Hoover mods fix this flaw.
$145.00
Bore Case for Larger Cylinders
Larger pistons and cylinders is a great way to add more power to your VW motor. Price includes decking the cylinder mating surface.
$310.00
Clearance for Stroker Crank
Cranks larger than 74mm will require machine work on the case to make them fit. The larger the crank, the more work is required to make them fit.
$295.00
Drill, Tap and Install Case Savers
Case Savers will help to prevent head studs from pulling out of your case.
$245.00
